document number: 93585 for technical questions, contact: indmodules@vishay.com www.vishay.com revision: 23-dec-08 1 single phase rectifier bridge, 3 a, 6 a kbpc1, kbpc6 series vishay high power products features ? suitable for printed circuit board or chassis mounting ? compact construction ? high surge current capability ? compliant to rohs directive 2002/95/ec description the kbpc series of si ngle phase rectifier bridge consists of four silicon junctions connected as a full bridge. these devices are intended for general use in industrial and consumer equipment. electrical specifications product summary i o(av) 3.0 a, 6.0 a v rrm 50 v to 1000 v d-72 major ratings and characteristics symbol characteristics kbpc1 kbpc6 units i o 36a i fsm 50 hz 50 125 a 60 hz 55 137 i 2 t 50 hz 12.5 78 a 2 s 60 hz 11.4 71 v rrm range 50 to 1000 v t j - 40 to 150 c voltage ratings part number v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v v rms , maximum recommended rms supply voltage v kbpc1005 kbpc6005 50 50 20 kbpc102 kbpc602 200 200 80 kbpc104 kbpc604 400 400 125 kbpc106 kbpc606 600 600 250 kbpc108 kbpc608 800 800 380 kbpc110 kbpc610 1000 1000 500
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 93585 2 revision: 23-dec-08 kbpc1, kbpc6 series vishay high power products single phase rectifier bridge, 3 a, 6 a fig. 1 - case temperature ratings fig. 2 - case temperature ratings forward conduction parameter symbol test conditions kbpc1 kbpc6 units maximum dc output current i o t c = 50 c, resistive or inductive load 3.0 6.0 a t c = 50 c, capacitive load 2.4 4.7 maximum peak one cycle, non-repetitive surge current i fsm t = 10 ms, 20 ms following any rated load condition and with rated v rrm reapplied 50 125 t = 8.3 ms, 16.7 ms 55 137 maximum i 2 t capability for fusing i 2 t t = 10 ms initial t j = t j maximum 100 % v rrm reapplied 12.5 78 a 2 s t = 8.3 ms 11.4 71 t = 10 ms 17.7 110 t = 8.3 ms 16.1 1000 maximum i 2 t capability for fusing i 2 t t = 0.1 ms to 10 ms, no voltage reapplied 177 1105 a 2 s maximum peak forward voltage per diode v fm i fm = 0.5 x i o , t j = 25 c 1.1 1.2 v typical peak reverse leakage per diode i rm t j = 25 c, 100 % v rrm 10 10 ma t j = 150 c, 100 % v rrm 1.0 1.0 operating frequency range f 40 to 1000 hz maximum repetitive peak reverse voltage range v rrm 50 to 1000 v thermal and mechanical specifications parameter symbol kbpc1 kbpc6 units operating and storage temperature range t j , t stg - 40 to 150 c thermal resistance, junction to case r thjc --k/w approximate weight 56g 0.18 0.21 oz. avera g e output current (a) maximum allowable case temperature (c) 0 20 60 140 100 40 8 0 120 160 0.0 0.5 4.0 2.5 2.0 1.5 1.0 3.0 3.5 935 8 5_01 resisti v e, ind u cti v e load kbpc1... capaciti v e load avera g e output current (a) maximum allowable case temperature (c) 0 20 60 140 100 40 8 0 120 160 0 1 2 8 6 5 4 3 7 935 8 5_02 resisti v e, ind u cti v e load kbpc6... capaciti v e load
document number: 93585 for technical questions, contact: indmodules@vishay.com www.vishay.com revision: 23-dec-08 3 kbpc1, kbpc6 series single phase rectifier bridge, 3 a, 6 a vishay high power products fig. 3 - non-repetitive surge ratings fig. 4 - non-repetitive surge ratings circuit configuration maximum peak output current (a) pulse train duration (s) 10 -2 10 -1 110 0 10 60 30 20 50 40 935 8 5_03 from any rated load condition kbpc1... maximum peak output current (a) pulse train duration (s) 10 -2 10 -1 110 0 40 140 8 0 60 120 130 100 30 20 10 70 50 110 90 935 8 5_04 from any rated load condition kbpc6... + - ~ ~ i o(a v ) links to related documents dimensions www.vishay.com/doc?95250
document number: 95250 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 23-nov-07 1 d-72 outline dimensions vishay semiconductors dimensions in millimeters (inches) + ~ ~ ? 3.80 (? 0.150) 15.75 (0.620) 14.75 (0.580) 15.75 (0.620) 14.75 (0.580) 10.8 (0.425) 10.0 (0.394) 5.33 (0.210) 4.33 (0.170) 25.4 (1.000) min. ? 1.10 (? 0.043) ? 0.90 (? 0.035) 10.8 (0.425) 10.0 (0.394)
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
